PLACUT 101i

• Higher Cutting Speed: Compared to the conventional type, our dual tips design can greatly increase the cutting speed.
• Less Consumables: While cutting thick plates, the inner tip is completely protected for increasing its usage life.
• Easier Operation: No stand-off cutting is needed, which makes the operation easier.
  
• Safer Operation: There is no potential to assisting tips during the cutting process, which makes a safer operation.
• The machine is operated with 40% of power saving and less noise.
• The output current is set and displayed in numeral format.
• Special dual tips design:  Thin plates can be cut with the single tips for smaller kerfs, and thick plates can be cut with dual tips for a better quality result.
• The machine is worked in 100% of duty cycle, and is compatible with CNC system and other automatic equipments.
• The machine is covered under a complete protection, which includes trouble detections for gas pressure, machine's temperature, input voltage, over current, short-circuited electrode, and failing ignition.
• Designed with the gouging function.
• 100% of compressed air is flowing through both of the inner and outer tips, which results in the best cooling effect and the extended usage life of the torch.

Specification: